Notebook case (general-purpose multi-slide type parts) M｜SPC52 ｜Original

Notes

This product is not designed to protect the main body from strong impacts such as dropping. Please handle with care.
・Please note that cracks may occur due to the nature of the product.
・To increase adhesive strength, it is recommended to wait at least 10 minutes after bonding before use.
・Some smartphone devices may not adhere due to surface treatment, or the adhesive strength may be weak. In such cases, please use the product after placing it in a case made of PC material.
・Although it is possible to mount the case over the case, it cannot be used with the following types of cases: soft cases such as TPU and silicone, cases with dirt, scratches, unevenness, roughness, or curvature on the adhesive surface, and cloth cases.
・Adhesive strength varies depending on the device used, usage conditions, and operating environment. Adhesive strength cannot be guaranteed.
・Do not apply solid color to the spine area (3mm or more recommended). If you are concerned about the finish, we recommend that you select a color that is less noticeable.
・Product specifications are subject to change without notice for improvement. Please understand this in advance.
・Adhesive strength varies depending on the device used, usage conditions, and operating environment. Adhesive strength cannot be guaranteed.
・It is possible to reattach the device after removal, but the strength of the bond may be reduced.
・Due to the nature of the material, the adhesive sheet may shrink in size depending on the storage location, storage method, and changes over time.
・Due to the characteristics of the material, adhesive performance may deteriorate depending on the storage location, storage method, and changes over time.
・Depending on where and how the product is used and how it changes over time, adhesive residue may adhere to the product when it is peeled off.